Fault; Troubleshooting - Angelo Po 0N0GRE Manual De Uso

The appliance has been tested before being put
into service. The information provided below
is intended to assist in the identifi cation and
correction of any anomalies and malfunctions
which might occur during use.
The user can solve some of these problems
himself, but for others specifi c technical
knowledge or skill is required, and so they
must only be carried out by qualifi ed staff with
recognised experience acquired in the specifi c
sector of operation.
Faults
The heating elements do
not come on.
GB
3301460_ut_GB_rev.2

FAULT

TROUBLESHOOTING

For all requirements contact the agents or
the headquarters of Angelo Po which can be
found in the contacts section of the website
http://www.angelopo.com.
Causes
Electrical connection not
made correctly.
Safety thermostat tripped.
Switch faulty.
- 14 -
Important
Remedies
Check the connection of the
electrical wires.
Check the water level and reset
the safety thermostat.
Important
If the problem persists, call the
after-sales service
Replace the switch.
Important
If the problem persists, call the
after-sales service
ENGLISH