Installation Of The Appliance; Room Ventilation - Angelo Po 0N0GRE Manual De Uso

All installation stages must be considered right
from production of the general layout. Befo-
re starting these stages, as well as deciding the
place of installation, if necessary, the person
authorised to carry out these operations must
organise a "safety plan" to protect the people di-
rectly involved, and he must also ensure strict
compliance with all legal requirements, espe-
cially those relating to mobile work-sites.
The place of installation must have all the con-
nections needed to supply the appliance and
dispose of the production residues, must be
suitably lit and must meet all legal health and
hygiene requirements to prevent the contami-
nation of the foods.
If necessary, fi x the exact position of each indivi-
dual appliance or subassembly by mark coordi-
nates to locate them correctly. (see explanatory
diagram).
GB
Important
The room where the appliance is installed
must have air inlets to ensure that the ap-
pliance can operate correctly and provide the
necessary air exchange in the room itself.
Important
The air inlets must be of appropriate size and
must be protected by gratings and placed so
that they cannot be obstructed.
3301460_inst_GB_rev.2

INSTALLATION OF THE APPLIANCE

ROOM VENTILATION

- 8 -
50 mm
100
mm
Install at a distance of no less than 50 mm from
the rear wall and no less than 100 mm from
the side wall if they are not heat-resistant to
temperatures of at least 90°C.
Install in accordance with the relevant legislation,
regulations and specifi cations in the country of
use.
ENGLISH