CAMPAGNOLO C10 HD-L Manual De Instrucciones página 11

• Remove the plastic band and the adhesive
"Warning" label.
• Move the chain on to the larger chainring
(keeping it on the smallest sprocket), then
position the links to be closed in the area indi-
cated in Figure 6.
• Fit the internal link (B - Fig. 7) into the exter-
nal link (C - Fig. 7), then fit the small guide pin
(D - Fig. 7) in the link hole from inside the
chain towards the outside.
18
6
7
D
C
B
External side
of the chain.
ENGLISH
• Centre the small guide pin (D) in relation to
the axis of the chain, then fit the small pin (E)
into the small guide pin (D), from inside the
chain towards the outside (Fig. 8).
Note
Only one of the two holes in the small pin (E)
can be used for coupling with the small guide
pin (D).
• Position the tool UT-CN200 as shown in Fig. 9.
9
ENGLISH
8
E
D
External side
of the chain.
19