Maintenance; Daily Maintenance - Rebel BTR170 Manual De Instrucciones

4 - Maintenance

Daily maintenance

Operation
Check the mandrel thread
Control the battery load level
Add grease inside the traction fork
Replacement or cleaning of the mandrel
The insert should be screwed in freely by hand
Oil draining and filling up
Replacement of the anvil
(If the internal diameter is > D +
0.5mm)
INSPECTION 1
Controling the main fonctions and
performances
Replacement of the oil and draining
Calibration of setting load
INSPECTION 2
Full maintenance of the setting head (seal parts,
spring, ...)
Replacement of the traction fork
Frequency
Everyday
Everyday
Each mandrel replacement
Between 5 000 and 10 000 cycles
Between 5 000 and 15 000 cycles
Between 25 000 and 50 000 cycles
Every 250 000 cycles
Every 500 000 cycles
43