Assembly Middle Seat - Extremis WALRUS Instrucciones De Montaje

ASSEMBLING THE MIDDLE SEAT
WHAT YOU NEED
2 people
no. 17 spanner
no. 5 hex key
+/- 30 min.
2 to 4 trestles
2. Attach the 4 feet to each corner of the frame with an
M10x20 bolt. Tighten them using a no. 17 spanner.
4. Push 3 M8x20 bolts, each with one M8 flat washer on
them, through the underside of the frame so that they
come out in the body of the back rest, and attach them
with an M8 cap nut.
8 walrus middle seat
1. Place the frame on trestles (so that you can reach the
underside more easily). Be sure to place the frame with
the small rods pointing upwards.
3. Attach the backrest to the back of the frame (the side
with no rods sticking out), with the storage pouch
facing outwards. Make sure the holes in the frame
match up with the holes in the backrest.