How To Install Your Wall Control; How To Wire Your Ceiling Fan; How To Assemble Your Ceiling Fan - Fanimation HUGH FPS8332 Serie Manual Del Usuario

1. Carefully push all connected wires inside wall
switch box. Secure the wall-mounted control to the
outlet box with two screws provided. Then, the face
plate attaches the wall control with two painted
screws. (Figure 1)
1. Connect the green grounding lead from the ceiling
bracket to the supply grounding, from motor and from
wall control conductor (this may be a bare wire or wire
with green colored insulation). Securely connect wires
with a wire connector. Securely connect the white
wire (coming from motor) to the white supply (neutral)
wire using a wire connector. Securely connect the
black wire (coming from motor) to the black wire from
wall control using a wire connector. Securely connect
the blue wire (coming from motor) to the blue wire
from wall control using a wire connector. (Figure 1)
After splicing and making the wire connections, the
2.
wires should be spread apart and turned upward with
the grounded conductor and the equipment-grounding
conductor on one side of the ceiling bracket and the
ungrounded conductor on the other side of the ceiling
bracket. (Figure 1)

How to Install Your Wall Control

How to Wire Your Ceiling Fan

Screw
Light
Switch
Outlet Box
Blue Wire
from Wall Control
Green Wire
from Supply
White Wire
from Supply
White Wire
from Motor
Green Wire
from Motor
HARDWARE USED:
WIRE
CONNECTORS
8
Fan Speed
Switch
Figure 1
Green Wire
from Ceiling Bracket
Green/Yellow Wire
from Wall Control
Black Wire
Blue Wire
from Motor
from Motor
Figure 1
x 4
Black Wire
from Wall
Control