Assembly - Attaching The Fan Blades; Attaching The Blades To The Blade Brackets - HAMPTON BAY NORTH SHORELINE Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6
Mounting the fan-motor assembly
(close-to-ceiling mount)
WARNING: The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
□
Carefully unhook the fan from the mounting bracket (A) and
align the locking slots of the ceiling canopy (C) with the two
screws (JJ) in the mounting bracket (A). Push up to engage
the slots and turn clockwise to lock in place. Immediately
tighten the two mounting screws firmly.
□
Install the two mounting screws (saved from Assembly Step
1 "Prepairing for mounting" into the holes in the canopy (C)
and tighten firmly.
□
You may now proceed to attaching the fan blades.

Assembly - Attaching the Fan Blades

1
Attaching the blades to the blade
brackets
□
Attach a blade (H) to a blade bracket (G) using the decorative
nuts (HH) and blade attachment screws (II) provided. Insert a
blade attachment screw (II) through a hole in the blade (H) and
the blade bracket (G) and the decorative nut (HH).
□
Repeat for the two remaining holes in the blade.
□
Tighten each screw (II) securely.
□
Repeat these steps for the remaining blades.
II
G
H
HH
A
2
Fastening the blade bracket to the
motor
□
Fasten the blade bracket to the fan-motor assembly (D) by
inserting the alignment post into the slot on the bottom of
the motor and tightening the blade bracket screws (QQ).
The blade bracket screws (QQ) are pre-installed into the
blade bracket (G).
□
Repeat this step for the remaining blade brackets.
QQ
RR
11
Please contact 1-855-HD-HAMPTON for further assistance.
JJ
L
D
D
G
HAMPTONBAY.COM