Connect The Water Supply - Kohler K-4108BR Guia De Instalacion

Gasket
T-Valve
Supply Hose

6. Connect the Water Supply

CAUTION: Risk of property damage. Do not push or pull
on the water connection between the seat and the water
supply stop. This will prevent water leakage.
NOTICE: Use care to avoid cross threading or overtightening the
connections. Use an adjustable wrench to tighten one-quarter turn
past hand-tight.
Connect the T-valve to the bidet hose.
If needed, connect the supply hose to the connector valve.
Connect the supply hose to the T-valve.
Confirm the gasket is in place in the T-valve. Install if needed.
Connect the T-valve to the water inlet on the toilet tank.
Turn on the water supply.
Check all connections for leaks and make any adjustments as
needed.
1194356-BR2-A
Hose
English-8
Kohler Co.