Brentwood Appliances MPI-45 Instrucciones De Operación Y Seguridad página 5

ironing.
3. Once you select a fabric type set the temperature dial to the appropriate setting for your fabric.
Using Your Travel Iron:
1. Steam ironing requires high temperatures. The temperature level for steam ironing is
indicated in the temperature control knob.
2. After filling the reservoir with water, place the steam iron upright on its base stand and insert
the plug into the wall socket.
3. Set the temperature control knob to the required ironing temperature as indicated by the
ironing symbols.
4. During the heating-up proceed the indicator lamp will be on, the lamp will go out once the
required ironing temperature is reached.
NOTE: Before ironing any fabrics, the soleplate should be cleaned by passing it over an old,
clean cotton cloth, while using the steam jet
residues or lint particles trapped inside the openings in the soleplate.
5. The steam function can now be switched on and off using the steam selector.
6. For dry ironing, the water reservoir may be empty. Should there be water left in the reservoir,
the steam jet function may also be used when dry-ironing at higher temperature settings.
7. Place the steam iron upright on its base stand after use and remove the plug from the wall
socket.
Steam
• When the steam button
soleplate, this function can be very useful when removing stubborn creases. The steam function
may also be used with iron held vertically, to restore the surface of fabrics.
• For a sufficiently strong steam jet, the reservoir must be at least a quarter full.
Cleaning:
Note: before cleaning the iron in any way, make sure that the appliance plug is not connected to
the socket.
1. Move the temperature dial selector to OFF and unplug the iron. Allow it to cool completely
before handling.
2. If necessary, the unit may be wiped with a dry lint-free cloth. To avoid the risk of electric shock,
do not clean the appliance with water and do not immerse it in water.
3. Starch and other deposits on the exterior of the soleplate may be removed with a woolen
clothe soaked in a vinegar-water solution.
4. Do not use abrasives or harsh cleaning solutions. Do not put vinegar or other descales into the
water reservoir.
NOTICE: Always unplug the product from the electrical outlet when it is not in use or will be left
unattended.
5. Pour any remaining water out of the reservoir through the water fill hole and turn the steam
selector to the
6. To avoid damage to the soleplate, store the steam iron in upright position on its base stand.
is pressed, an additional hot steam jet is emitted from the
position.
function; this helps to flush out any dirt
5