Function
This locomotive has the following equipment and
features:
• This model is designed for operation with H0
2-rail DC systems (track according to NEM
standards) with conventional DC power packs
(12 volts).
• This locomotive is equipped with an eight-pole
electrical connection for retrofitting it with a digi-
tal decoder complying with NEM Standard 652.
• Headlights with "Swiss headlight changeover".
Safety Information
• The feeder track must be equipped to prevent
interference with radio and television reception,
when the locomotive is to be run in conventional
operation. The 611 655 interference suppressi-
on set is to be used for this purpose.
The interference suppression set is not suitable
for digital operation.
• This locomotive is only to be used with the
operating system it is designed for.
• This locomotive must not be supplied with
power simultaneously by more than one power
source.
• Please make note of the safety information in
the instructions for your operating system.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Trix have
been installed in Trix products or where Trix products have been
converted in such a way that the non-Trix parts or the conversion
were causal to the defects and / or damage arising. The burden
of presenting evidence and the burden of proof thereof, that the
installation of non-Trix parts or the conversion in or of Trix products
was not causal to the defects and / or damage arising, is borne by
the person and/or company responsible for the installation and / or
conversion, or by the customer.
5