Trix Köf II Serie Manual De Instrucciones página 17

Important: Changes in the settings marked with for the Selectrix
mode of operation automatically lead to changes in the DCC mode
of operation and vice versa!
Settings for different parameters:
CV
1
3
4
*
5
17
18
29 bit 0: Travel direction polarity reversal + lighting
*
49
*
50
*
51
Other changes are not possible. The values set at
the factory have been selected to insure trouble-free
operation.
Description
address
acceleration delay
braking delay
maximum speed
Extended address (Upper part)
Extended address (Lower part)
bit 1: number of speed levels 14 / 28
bit 5: address size 7 bit / 14 bit
pulse width for motor control
Rule variant
bit 0: Motor polarity reversal
bit 1: Only lighting
Bit 2: Track polarity reversal
*
CV 29 Bit 5 = 1
CV 29 Bit 5 = 1
The operating instructions for your central unit
(example: Central Control 2000) will give you exact
procedures for setting the different parameters.
With many systems the values set at the factory
can be read in the programming mode.
DCC Value Selectrix Value
1 – 99
0 – 127
0 – 127
1 – 7
not necessary
not necessary
0 / 1 not necessary
0 – 3
0 - 3
0 / 1 not necessary
1 – 99
1 – 7
1 – 7
1 – 7
1 – 4
1 – 4
17