Rointe 1000RAD Manual De Instalacion Y Uso página 12

NIGHT mode
Night mode is shown on the display by an arrow pointing to the moon
symbol and the Night temperature on the screen.
To switch from Comfort mode to Night mode, press the
button again. The word "RID" will appear briefly along with an acoustic
signal.
You can set the desired temperature with the
DECREASE buttons. This temperature does not depend on the
Comfort temperature and is usually used to set a temperature below
19°C, which is ideal for a good nights sleep. This selected temperature
is used during the WEEKLY PROGRAMMING mode (section 5.4.) as
the set temperature for the periods in Night mode.
ANTI-FROST mode
Anti-Frost mode is shown on the display by an arrow pointing to the
snowflake symbol and 7ºC temperature on the screen.
To switch from Night mode to Anti-Frost mode, press the
button again.
In this operating mode, the user cannot regulate the temperature as it
remains fixed at 7ºC. This mode prevents the room temperature from
falling below 7ºC.
5.4 AUTOMATIC modes
In Automatic mode, the product regulates the temperature according to the daily programme
created by the user, using the temperatures previously set in the Comfort and Night modes.
To switch from ANTI-FROST mode to PROGRAMMING mode, press
the MODE button again.
The word "PRO" will appear on the screen with an arrow pointing to
the clock symbol (located at the bottom right of the screen). In the
"clock" section of the screen, the current time of day is displayed,
only if the time and day of the week have been set correctly when the
product is first switched on (section 5.2).
12
MODE
INCREASE and
MODE