Merrithew STOTT PILATES SPX Manual Del Propietário página 14

Step 3. Installing New Springs
Determine replacement spring package.
Springs are color-coded at the ball end. Red = 100%, Blue = 50%, White = 25%
SPX ® Reformers arrive with four 100% springs, and one 50% spring.
NOTE:
SPX SPRING PACKAGE
arrange as follows:
4 100%
X
# 1
100 100
Leaving middle position free, place 100% springs
in remaining positions on the carriage, as illustrated
on right. Install 50% spring in the center.
Replacement spring packages are also available.
TRADITIONAL SPRING PACKAGE
4 100%, 1 50%
X X
# 1 #
100 100
Place 50% spring in the center and two
100% springs on either side.
Starting with spring #1 from your spring package,
1
remove nylon locknut from bolt end of spring.
14
# 2 # 3
100
arrange as follows:
# 4
2 # 3
50 100 100
# 4
100
Spring sleeves are required for proper function
NOTE:
of this Reformer if it features a plastic spring holder.
HIGH-PRECISION SPRING PACKAGE HIGH-PRECISION SPRING PACKAGE
3 3 100%, 1 100%, 1
X X
# 5
# # 1 1
100 100
if this set purchased start here:
Place 50% spring in the center, and 25% spring to
one side. Place 100% springs in remaining positions.
Start at one end of the carriage. Thread bolt end of
2
spring #1 through first hole of plastic spring holder.
arrange as follows: arrange as follows:
50%, 1 50%, 1 25% 25%
X X X X
# # 2 2 # # 3 3
25 50 25 50 100 100
# # 4 4 # # 5 5
100 100