Function Settings; Cleaning The Water Tank - Selecta AUTESTER ST DRY PV B 12L Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80369 REV 0
J
.P. SELECTA s.a.u.
JULIO/2018

8.8 Function settings

a) Press the "STEP" key for 20 seconds. Without any active program (message
"Ld").
b) By means of the "SELECT" key you can select the alternative options:
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
c) Press the "STEP" key (arrow up) or "DRY" key (arrow down) to select the
desired value.
d) Confirm the value by pressing the "START/STOP" key. The equipment will
emit a confirmation beep.

8.9 Cleaning the water tank

1) Empty the tanks water by draining it. Connect the water outlet using the one end
of the tube without connector, and the other end of the tube to a drainage sink. Then
turn the draining knob anti-clock wise to drain the water from the machine.
2) Open the tank cover board, you can use a screwdriver to loose the five screws.
3) Pull up the water tank cover by one hand.
4) Pull up the tank cover completely and then disassembly the cover.
5) Then you can start cleaning the tank. Use a cotton with some alcohol or disinfect-
ant to clean the tank. Wash it with distilled water, then empty the tank and dry it.
6) After cleaning the tank, assembly the cover and tighten the screws.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
YEAR "YER"
MONTH "MtM"
DAY "DAY"
HOUR "HOR"
MINUTES "MIN"
printing "Prt" (OFF, ON)
EXIT "Eit"
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 27