Description of the Appliance
12
Refrigerator (A)
Refrigerator is used for storing fresh foods for few days.
Shelf (1)
(number depends on the model)
Shelf can be optionally placed on the guides inside the
appliance. It is protected against pulling out. If you want to
remove it, slightly lift up the back part and pull it out.
Glass shelves (some models only have them) are protected
with plastic spacers. Before pulling the shelf out, spacers must
be moved towards you. Spacers can be also removed,
however, it is better to keep them for any later transport.
Quickly perishable food should be stored on the back i.e. the
coldest part of the shelves.
Bottle rack
(in some models only)
Bottle rack (number depends on model) is intended for storing
the bottles. There are two installation positions available
(horizontal or lifted in the front) thus enabling the positioning of
bottles on the stopper as well.
It is protected against pulling out. If you want to pull it out,
simply lift its rear part and pull it towards you.
Warning!
If the door contains storing shelves, install the rack in such
position that the length of the bottles will not hinder the closing
of the door.
The rack may carry 9 bottles of 0,75 l or more at the maximum
(total weight max. 13 kg) – note the label underneath the
thermostat box inside the appliance.
Instructions for Use