Operating Features - Solo Hudson Bak-Pak 93475 Manual Del Usuario

OPERATING FEATURES:

Nozzles - Your Hudson® Sprayer is supplied with nozzle arrangements to provide a variety of spray patterns.
Item
Flat spray nozzle
Jet stream nozzle
Jet stream nozzle and
Swirl plate = hollow cone
Plastic adjustable
nozzle
SPRAY TIP ASSEMBLY
1. Flat spray nozzle
2. Filter
3. Jet cap
4. Swirl plate
5. Nozzle cap
6. Nozzle body
7. Brass adj. nozzle*
8. Nozzle retaining nut
8
1
2
*Brass adjustable nozzle is not a standard item on Hudson® sprayers.
Spray tips should be assembled as above for desired spray pattern.
SPRAYING:
Prime the pump with rapid pump strokes. When you feel very firm resistance, the pressure chamber is filling with liquid. With repeated piston strokes, the air in the
pressure chamber is slowly compressed. By pressing the hand lever, the valve opens, and liquid is forced through the nozzle. The shut-off valve has a retaining clip
which keeps the valve in the "OPEN" position for continuous operation. Pump using the end of the pump handle, as it is less fatiguing. The volume of liquid
delivered varies with the working pressure which should be as high as needed to ensure an adequate spray pattern for each individual application.
NOTE:
Should the pressure drop very quickly, drain the tank completely and pump without liquid. By this procedure, the air chamber is refilled with the required
volume of air. It is advisable to pump the tank completely empty from time to time.
8
8
3
4
2
Flat spray Hollow
cone spray
871-936 Instruction ©2012 H. D. Hudson Manufacturing Company
Application
Row treatment
Spot & longer range
Shrubs and bushes
Spot, shrubs & bushes
8
7*
3
2
Brass
adjustable
nozzle*
2
5
8
6
2
2
Jet stream Plastic
adjustable
nozzle