Setup The DES-1316 PoE Web Smart Switch
The setup of the Switch can be performed using the following steps:
A. Install DES-1316 in a fairly cool and dry place. See Technical Specifications fo
r the acceptable temperature and humidity operating ranges.
B. Install the Switch in a site free from strong electromagnetic field generators (su
ch as motors), vibration, dust, and direct exposure to sunlight.
C. Leave at least 10cm of space at the front and rear of the hub for ventilation.
D. Install the Switch on a sturdy, level surface that can support its weight, or in a
n EIA standard-size equipment rack. For information on rack installation, see the ne
xt section titled Rack Mounting.
E. When installing the Switch on a level surface, attach the rubber feet to the bott
om of each device. The rubber feet cushion the switch and protect the case from s
cratching.
Rack Mounting
The DES-1316 can be mounted in an EIA standard-size, 19-inch rack, which can be
placed in a wiring closet with other equipment. Attach the mounting brackets at the
Switch's front panel (one on each side), and secure them with the provided screws.
Then, use screws provided with the equipment rack to mount each Switch in the rack.
Combine the Switch with the provided screws
2