Manual Time Setting; Alarm Setting - Bresser Thermo Hygro Quadro NLX Manual De Instrucciones

2. If no radio signal is still received, the time setting must
be made manually.
Read the detailed manual for more information about
manual time and alarm setting (see download information
on page 2).

10 Manual time setting

1. In normal display mode, press SET button for approx. 3
seconds to switch to time settings mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press SET button to confirm and continue to the next
setting.
5. Settings order: time zone > hours > minutes > year >
month > day > 12/24-hours mode
6. Finally press the SET button to save the settings and
exit the setting mode.

11 Alarm setting

Alarm time setting
1. In normal display mode, press SET button to switch to
alarm time display (AL).
2. Press and hold SET button for approx. 3 seconds to
enter alarm time setting mode.
3. Digits to be set are flashing.
4. Press UP or DOWN button to change the value.
5. Press SET button to confirm and continue to the next
setting.
15 / 88