Publicidad
Idiomas disponibles
Idiomas disponibles
Attach Cabinet Door Stop
5
□ Attach the Cabinet Door Stop to the front of cabinet bottom using 2 Phillips Head Bolts
(M4x8mm).
Phillips Head Bolt M4x8mm
Qty: 2
Cabinet Door Stop
Qty: 1
Attach Firebox to Cabinet
6
With the aid of an assistant, place the Firebox onto the Cabinet Frame with Regulator Hose and
□
Side Burner Ignition Wire hanging inside of Cabinet. Note: Rear of Firebox rests on two tabs at
back of Cabinet.
Line up the holes and attach the Firebox to the Cabinet Frame using 4 Phillips Head Bolts (M6x16mm)
and 4 Plastic Washers (M6).
Hint: You may need to slide the Firebox Assembly forward, backward, or lift slightly for the bolt
holes to properly line up.
Push the 5 Control Knobs onto Valve Stems. See Inset 1.
□
Phillips Head Bolt M6x16mm
Qty: 4
Plastic Washer M6
Qty: 4
10
Inset 1
Publicidad
