Grill Lighting Instructions
1. Before each use, check all hoses for cracks,
nicks, cuts, or abrasions. If a hose is damaged
in any way, do not use your grill before
replacing the hose with an authorized part
from the Parts List. Also make sure all gas
supply connections are securely tightened.
2. Familiarize yourself with the Safety and Use
and Care instructions in this manual. Do not
smoke while lighting the grill or checking gas
supply connections.
3. Be sure the LP gas tank has gas.
4. Open the grill lid.
Failure to replace a faulty hose, secure gas
supply connections, or to open the lid before
proceeding to the Lighting Procedures could
result in a fire or explosion that could cause
serious bodily injury, death, or property
damage.
5. Set control knobs to OFF and open the LP gas
tank valve SLOWLY.
6. Push and turn one of the main burner
control knobs identified with a
"Hi". Press the electronic ignition button
and hold for 5 seconds. You should hear
a clicking sound which shows the electronic
ignition is working.
7. If burner does not light within 5 seconds, turn
the burner control knob to "OFF". Wait 5
minutes for the gas to clear and repeat the
lighting procedure.
8. Repeat Step 6 to light other burners.
USE AND CARE INSTRUCTIONS
mark to
22
9. Follow the match lighting instructions if
burners don't light.
Infrared Burner
`
Main Burner
Side Burner and Infrared Searing Burner
Lighting Instructions
1. Follow steps 1 through 3 of the Grill Lighting
Instructions.
2. Open the grill lid or side burner cover.
3. Set control knobs to OFF and open the LP gas
tank valve SLOWLY.
4. Push in the burner control knob and turn left to
"Hi".
5. Immediately press the electronic ignition
button for 3 to 5 seconds. You should hear a
clicking sound which shows the electronic
ignition is working.
6. If burner does not light within 5 seconds, turn
the burner control knob to "OFF". Wait 5
minutes for the gas to clear and repeat the
lighting procedure.
7. Follow the match lighting instructions below if
the burner does not light.
Side Burner
Electronic Ignition