Publicidad
Idiomas disponibles
Idiomas disponibles
Install Side Burner Valve
15
Locate the side burner ignition wire underneath the main burner control panel. It will be labeled.
Feed side burner valve and igniter wire through hole in left side of cabinet.
Open side burner lid and cut tie wrap securing grate to pan. On underside of pan, remove the 2
screws holding the side burner in place. See Inset 1.
Secure the side burner valve stem to the Side Burner Lower Control Panel using 2 Phillips Head
Bolts(M4x8mm). See Inset 2.
Center the side burner valve into the side burner tube. See Inset 3. Reattach side burner to pan
with 2 previously removed screws.
Use 1 Phillips Head Bolt (M4x8mm) to attach the Side Burner Lower Control Panel to the firebox.
See Inset 4.
Phillips Head Bolt M4x8mm
Qty: 3
Attach Side Burner Control Knob and Side Burner Ignition Wire
16
Attach the side burner ignition wire over the side burner connector pin. See Inset 1.
Push the Side Burner Control Knob onto the valve stem. See Insert 2
Inset 1
Inset 1
Inset 3
16
Inset 2
Inset 4
Inset 2
Publicidad
