Festo CMMP−AS Manual Del Usario página 30

Preparations for commissioning
1. Connect the motor
2. Connect the servo motor controller CMMP−AS.
3. Check readiness
4. To operate.
5. Install the parametrizing software on your PC.
6. Follow the installation instructions for the parametriz
ing software.
30
Make sure that the controller enable switch is
switched off.
Switch on the power supply for all devices.
The READY LED on the front of the device should
now light up.
Enter the data storage device in the disc drive.
If the SETUP program does not start automatically,
start the WINDOWS Explorer.
Select the disc drive in which the parametrizing
software is inserted.
Start the program SETUP.EXE (double−click).
.
Festo P.BE−K−CMMP−AS 0708NH English