Final Inspection; Cleaning And Maintenance Advice - Dyson airblade Manual Del Propietário

Final Inspection

Testing
Make sure that power is switched Please register your product
on to the unit. information with us.
Place hands into the Airblade • Y ou may send in the
TM
hand dryer and unit and airflow completed registration card in
will begin automatically. the provided pre-paid envelope.
Withdraw hands slowly upwards • C all our Dyson Helpline toll
through the air a couple times free at 1-888-DYSON-AB
to thoroughly dry hands in
• V isit us on the web at
12 seconds.
www.dysonairblade.com
Remove hands and the unit
will shut off.
Cleaning and
Maintenance Advice
Cleaning Advice Maintenance Advice
Surfaces Air Inlet
Make sure that all surfaces of Regularly check at the base of the
the Airblade hand dryer are Airblade
TM
cleaned daily with a soft cloth that it is free from dust and debris.
and non-abrasive, non-caustic If the air inlet gets dirty simply
cleaning solution. remove dust or debris with a dry
cloth or vacuum
Fig 12
Make sure that all of the Airblade
hand dryer's surfaces and the
(4) sensor lenses are wiped down
hand dryer to ensure
TM
daily to maintain uninterupted
operation of the unit
Fig 12 .
Fig 13
Dyson Airblade
ENG
TM
10
Fig 13 .
TM hand dryer