Beko GN1416220CX Manual De Utilización página 139

Operating the product
23. Vacation Function Icon
To activate the Vacation Function, press the FN
Button (until it reaches the umbrella icon and
the bottom line). The Vacation Function Icon and
indicator will blink when you touch them. Thus,
you would be able to tell if the Vacation Function
is activated or deactivated. When you press the
OK button, the Vacation Function Icon will display
continuously and this function will be activated.
Its indicator will continue to blink throughout this
process. Press the OK button to deactivate the
Vacation Function. Both icon and indicator of
the Vacation Function will begin to blink and this
function will be deactivated
24. Celsius Indicator
It displays temperature in degree Celsius. When
the degree Celsius Indicator is activated, the
temperature setpoint values are displayed in
degree Celsius together with the display of its
corresponding icon.
25. Key lock
Press and hold the Key Lock button for 3 seconds.
When the Key Lock symbol goes OFF,
Key Lock will be disabled. Buttons will not function
if Key Lock mode is active. Press and hold the Key
Lock button for 3 seconds again. When the Key
Lock icon goes OFF, Key Lock will be disabled.
Press the Lock Key button if you want to prevent
any changes to the temperature settings of the
refrigerator.
26.Selection Button
Use this button to select the compartment
which you intend to modify its temperature. By
pressing this Button, you can toggle between
compartments. You can determine if the
compartment was selected from compartment
icons (7, 17, 18, 20, 28, 29). Irrespective of
the blinking of the compartment icon, the
compartment with the temperature setpoint value
which you want to modify will be selected. You can
then change the setpoint by pressing the setpoint
decrease button of the compartment (27) and the
setpoint increase button of the compartment (19)
If you do not press the selection button within 20
seconds, the compartment icon will go off Hence,
you would have to press this button again if you
wish to select a compartment.
27. Alarm off warning
In case of power outage/high temperature alarm,
and after inspecting food kept in the freezer
compartment, press the alarm off button to clear
the warning
28. Quick Cool Function Button (QuickCool)
The button has two functions. To activate or
deactivate the quick cool function press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings.
Shabbat Mode:
Press the Quick Cool Button for 3 seconds to
activate or deactivate the Shabbat Mode. When
Shabbat Mode is activated, the display, alarm, door
opening or light buttons will not function:
C
Use quick cooling function when you
want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into .the product
C
After 8 hours or when the refrigerator
compartment reaches the desired
temperature, the Quick Cool Function
will turn off automatically if you do not
do so.
C
If you press the quick cooling button
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
C
This function is not recalled when
power restores after a power failure.
29. Wine Cellar Temperature Indicator
The temperature setpoint values of the wine cellar
compartment display.
15 / 27 EN
Refrigerator / User Manual