How To Wire Your Ceiling Fan - Fanimation DRONE FPD6235 Serie Manual Del Usuario

NOTE: If fan or supply wires are different colors than indicated, have this unit installed by a qualified electrician.
WARNING
To avoid possible electrical shock, be sure electricity
s i u t n r e d o f f t a h t e m a
(Figure 1).
NOTE: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
CAUTION: INCORRECT WIRE CONNECTION COULD
DAMAGE THIS RECEIVER.
2. Connect wires using connectors as shown in Figure 2.
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
3. After connections have been made, put the white and
green leads to one side and the black leads to the
other side. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the
ungrounded conductor on the other side. (Figure 3).

How to Wire Your Ceiling Fan

n i u f s e b o x b e o f e r w r i n i
WARNING
g
L
N
AC POWER
BLACK WIRE
FROM CEILING
BLACK WIRE
FROM MOTOR
WHITE WIRE
FROM CEILING
WHITE WIRE
FROM MOTOR
10
Figure 1
BLACK
WHITE
GROUND
HANGER YELLOW
BRACKET / GREEN
MOTOR
Receiver
Figure 2
RECEIVER HARDWARE USED:
WIRE
CONNECTORS
LISTED
OUTLET BOX
Figure 3
MAIN FUSE BOX
DC MOTOR
BLACK
ANTENNA
x 3
RECEPTACLE CONNECTOR
FROM MOTOR
GREEN WIRE(GROUND)
FROM HANGER BRACKET
GREEN WIRE(GROUND)
FROM CEILING
GREEN WIRE(GROUND)
FROM MOTOR
GREEN / YELLOW-
WIRE(GROUND)
FROM RECEIVER
PLUG CONNECTOR
FROM RECEIVER