How To Hang Your Ceiling Fan - Fanimation DRONE FPD6235 Serie Manual Del Usuario

WARNING
The fan must be hung with at least 7´ of clearance from
floor to blades. (Figure 1)
WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
The outlet box must be securely anchored and capable
of withstanding a load of at least 35 lbs. Hanger bracket
must seat rmly against outlet box. If the outlet box is
recessed, remove wallboard until bracket contacts box.
If bracket and/or outlet box are not securely attached,
the fan could wobble or fall.
1. Securely attach the ceiling junction box acceptable for
ceiling support into the building structure. Junction box
is not supplied with the fan. (Figure 2)
2. Remove the three screws from the ceiling bracket
assembly. Retain the screws for later. (Figure 3)
3. Using the ceiling junction box screws provided with the
ceiling junction box, securely attach the ceiling bracket to
the ceiling junction box as shown. (Figure 4)

How to Hang Your Ceiling Fan

7
Ceiling
Floor
Figure 1
NOTE: Supply wires
omitted for clarity Figure 2
Figure 3
Wood Member
(2˝x 4˝ Approx.)
Ceiling
Ceiling Support
Cable
Figure 4
No
less than
7 ft
Outlet Box
Ceiling Bracket
Assembly
Junction Box
Ceiling Joist
Junction
Box Screw(2)
Ceiling Bracket