7.7
SMOKE VALVE ADJUSTMENT
7.7.1
Firstly open the door (A), and sequentially remove
the cements: B-front frontal, C-bottom wall, D-
THEN PROCEED AS SHOWN IN FIG. 7.4.1:
7.7.2
positioned on the front wall of the support by at
7.7.3
7.7.4
C).
7.7.5
7.7.5.1 the de ector support "C" then position the
de ector " " in its seat tighten the screws of
point "A"
g. 7. .1 .
7.7.5.2 Cements D lateral side C ottom wall
frontal
g. 7.
8 MAINTENANCE AND
CLEANING
8.1
SAFETY PRECAUTIONS
Before carrying out any maintenance or cleaning, take
the following precautions:
A) Ensure that all parts of the wood insert are
completely cold.
B) Ensure that embers are completely extinguished.
C) Use individual safety gear as set forth by directive
89/391/EEC.
D) Always use appropriate tools for maintenance.
Maintenance must be carried out by a specialised
assistance centre or by quali ed personnel.
8.2
CLEANING
The cleaning of the external part of the stove must be
executed only with a dry cloth not abrasive. Do not use
detergents.
8.3
REMOVING ASHES FROM THE FIREPLACE
The stove requires simple but frequent and careful
cleaning to guarantee ef cient performance and regular
operation at all times.
•
Open the door;
•
remove any coals and ashes from the replace using
a m etallic shovel;
•
remove the ash from the ash collection tank, using
an appropriate ash suction system;
•
close the door.
8.4
CLEANING THE GLASS
During operation of the wood insert it is possible to
facilitate the cleaning of the glass ceramic through
the pawl without having to open the door (Figure
7.5).
24
B
A
front
00 477 6020- 10/2017 - PALAZZETTI - PN - Italy
A
C
D
5 m m
B
- 7.4 -
C
- 7.4.1 -