Installation Instructions - Eaton ECOSENSE LDCM-PL-120-277-010V-GR Instrucciones De Instalación

Installation Instructions - LDCM - Plenum Rated: 0-10V, 450W/120V, 1000W/277V

Installation Instructions

1. Mounting the LDCM to a J-Box
Mount the power input/output side of the LDCM to the
j-box containing the supply line wires and the fixture load
wires. Use the supplied nut to hold the LDCM in place.
Optionally the Data control wire end of the LDCM can
also be mounted to a j-box.
Note: One (1) LDCM Module is required per maximum
length fixture run
2. Connect to Power and Data
Connect the input line power to the black(live) and
white(Neutral) input power wires on the LDCM.
Connect the output load wires going to the fixtures to the
red(live) and grey(neutral) output wires on the LDCM.
Connect the input ground building wire to the output
ground going to the fixture. The LDCM does not need to
be grounded.
2
EATON IL503004EN
JUNCTION BOX
Installation Instructions
JUNCTION BOX