Starting Signal Reception - ADE WS 1502 Instrucciones De Operación

Starting signal reception

If the batteries in the base station have been inserted, for
a brief moment all of the indicators on the display fade
in. Furthermore, the display is briefly lit up and a beep
sounds.
While receiving, only the - button functions; all other
buttons are deactivated during this time.
As soon as the signal has been received with sufficient
strength, the corresponding data and the radio-tower
symbol will be shown on the display. This process can last
a few minutes.
From now on, the weather station automatically switches
to receiving-mode multiple times each night. During
this process, the displayed time is compared with that
received from the time signal transmitter and, if necessary,
corrected.
If no sufficiently strong signal has been received,
the base station aborts the receiving process after a
few minutes and the radio-tower symbol goes out. The
receiving process is started again at a later point in time.
‚ In this case, the time proceeds as usual (beginning
with the start time of "00:00").
‚ First check whether the location of the base station is
suitable, see "Choosing a location".
56
FW Station.indb 56
The device then switches to receiving-mode,
during which the number of radio waves indicates
the quality of the reception: The more radio waves
shown on the display, the better is the reception.
Weather Station with Wireless Outdoor Sensor WS 1502/1503
21.09.2015 09:45:59