Cleaning - ADE WS 1502 Instrucciones De Operación

After a few seconds, the indicators start to blink and the
data from the outdoor sensor is retrieved.
Pay attention to the values shown on the display.

Cleaning

1. During operation via the mains: Pull the mains adaptor
2. As necessary, wipe the base station and the outdoor
3. Dry the device completely before you reconnect it with
Weather Station with Wireless Outdoor Sensor WS 1502/1503
FW Station.indb 71
To speed up the data exchange with the base
station, hold down the + button on the base
station until the OUTDOOR TEMPERATURE data is
deleted. Shortly thereafter, the newly loaded data
is displayed.
plug out of the base station.
sensor clean with a lightly-dampened cloth.
the mains adaptor.
71
21.09.2015 09:46:00