SATA 03005 Manual Del Uso página 34

Maintenance
- Do not attempt to repair or service the meter unless you are a qualified
professional technician and have sufficient instructions for calibration,
performance testing and repair, except for replacing batteries and fuse.
- When not in use, store the meter in a dry environment without strong
electromagnetic field.
Servicing
- If the meter fails, first check the batteries and fuse, and then consult this
manual to make sure the meter has been used correctly.
General maintenance
- Wipe the casing regularly with a damp cloth and a little detergent. Do not
use abrasives or solvents. If the terminals are dirty or wet, the reading may
be affected. To clean the terminals:
1. Turn off the meter and remove the test leads
2. Shake off the dust that may be present in the terminals
3. Take a new cotton swab dipped in alcohol and clean the inside of each
input terminal replacing batteries and fuse
Warning
To avoid false readings that can lead to electric shock and personal
injury, replace the batteries immediately when the low battery voltage
symbol "
To prevent damage to the meter or personal injury, use only the
specified fuse.
Turn off the meter and remove the test probes before opening the
meter casing or battery cover.
1. Replace the batteries:
Remove the sheath, remove the screws on the battery cover, open the
battery cover, replace the old batteries with two new ones of the same
model and ensure the correct polarity. Refit the battery cover and the
03005 / 03007
" appears.
-34-
EN DE RU KO PT JA ES