GB
PROGRAMMED MAINTENANCE
INTERVENTION
RECOVERY TANK CLEANING
SUCTION FILTER CLEANING
SOLUTION FILTER CLEANING
BRUSHES CLEANING
BRUSHES DISASSEMBLY AND CLEANING
SQUEEGEE CLEANING
FRONT SQUEEGEE RUBBER REPLACEMENT
REAR SQUEEGEE RUBBER REPLACEMENT
CHECK SQUEEGEE ADJUSTMENT
SQUEEGEE HOSE CLEANING
SOLUTION TANK CLEANING
CHECK BATTERIES ELECTROLYTE
CHECK OF THE BRAKE
TRACTION MOTOR CHECK
BRUSHES MOTOR CHECK
SUCTION MOTOR CHECK
CHECK BRUSHES BASE GROUP
SCREW TIGHTENING
* The hours refer to the ones indicated on the display (see under paragraph "HOUR METER").
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
NYLON
TYNEX
BRISTLES THICKNESS
MACHINE
CODE
jade 55ct
48902100
48902110
48902120
48902130
48902140
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
Excellent wear resistance, even with hot water ovr 60°C. It is hygroscopic. It looses its physical characteristics over the time.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor or ruin the polishing.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints. On irregular floors with deep joints or
relieves, it is recommended to use softer bristles which penetrate more easily and deeper. Please be aware that when brushes
bristles are worn out and therefore too small, they become rigid and unable to penetrate and clean deeper. This may also happen
with thicker bristles creating brush vibration.
QUANTITY
DESCRIPTION
2
Cylindrical brush Ø 105x533 nylon 0,6 red
2
Cylindrical brush Ø 105x533 PPL 0,4 white
2
Cylindrical brush Ø 105x533 PPL 0,3 white
2
Cylindrical brush Ø 105x533 tynex
2
Cylindrical brush Ø 105x533 nylon 0,3
DAILY
20 HOURS *
•
•
•
•
•
•
•
•
•
•
•
25
200 HOURS *
1000 HOURS *
•
•
•
•
•
•
•
•
GB