Scheduling - Amibot Flex Manual Del Usuario

Product Operation

Scheduling

You can schedule the robot and set it to start cleaning automatically at a certain time every day.
How to schedule the robot
Note: The robot can only be set when it's in standby mode or charging mode. If the robot is in sleep
mode, press
mode, stop it before scheduling.
Scheduling by the LED panel on robot
A. Setting robot clock (keep the robot in standby mode or power switched on)
Press to enter time checking mode, the LED panel will show the current system time,
will light on.
Press
to decrease hour or
Press
press
Press
to decrease it or
Press
setting won't be saved if
B. Check scheduling setting
Press to enter scheduling checking in standby mode,
show the scheduling time of Sunday, press
press
C. Setting scheduling time (keep the robot in standby mode or power switched on)
Press
the left two numbers on LED panel will flash, press
increase it.
Press
press
Press , weekly scheduling indicator will flash, press
day, Monday to Friday and daily scheduling.
Press
current scheduling setting won't be saved if
D. Cancel scheduling
Set the scheduling time to 00:00 in scheduling mode.
E. One key to set the scheduling or cancel it
Press and hold it for more than 2 seconds to set the current time of robot to daily scheduling
time in standby mode.
Press and hold it for more than 2 seconds to quit all scheduling time in scheduling checking
mode.
on main body or ON/OFF on remote control to wake it up. If the robot is in cleaning
to enter the hour-setting mode, the left two numbers on LED panel will flash, press
to enter the minute-setting mode, the right two numbers on LED panel will flash,
to decrease minute or
to enter the weekly-setting mode, weekly scheduling indicator will flash, press
to increase it.
to confirm the setting and revert to time checking mode, (during setting, the current
was pressed to quit).
to show the scheduling time of previous day.
to modify scheduling mode and enter the hour-setting in scheduling checking mode,
to enter the minute-setting mode, the right two numbers on LED panel will flash,
to decrease minute or
to confirm the setting and revert to scheduling checking mode, (during setting, the
to increase it.
to increase it.
to show the scheduling time of next day,
to increase it.
was pressed to quit).
12
will light on, the LED panel will
to decrease hour or
or to select separate
to