Movement idea Manual Del Propietário página 79

7
MAINTENANCE
TOP PLATE
Allows the weight to be selected. At the slightest damage or wear the parts does not try to select
the weight. Contact Techinical Assistance to make the change.
LOCKING STEEL CABLE
Always check that the screws are securely fastened to the plates. If the locks are damaged, do
not allow the equipment to be used. Contact Technical Assistance to make the change.
SNAPLINK
Some models use snap link, so it is extremely important to check the condition of the carabiner.
At the slightest sign of wear, deformation, difficulty to close and anything that could be
detrimental to its resistance, replace the snap link immediately.
REPLACEMENT CARABINER
For the replacement, always use a snap link supplied directly byMOVEMENT. If it is not possible
to obtain a snap link supplied by MOVEMENT, use a snap link that strictly meets the following
requirements.
-Material composition: Stainless steel AISI 316;
- Maximum closed capacity: 1600kg;
- Maximum open capacity: 350kg
-Monthly, verify with attention the conditions
of the snap link;
- Do not modify the snap link in any way;
- The opening of the snap link must be
ATTENTION!
turned to the weights column.
ARM CONNECTION
The gas spring is located between the leg support, if it is difficult to adjust the spring to gas,
difficult to move the legs, a gas spring that prevents movement of the legs or damages its
structure, contact your nearest service center.
DISPLACEMENT
If the equipment needs to be moved, do not use the weight stack. Risk of accident or equipment
damage.
37