Adjust The Cutting Diameter; Line Cut-Off Blade; Operation Tips; Cutting Tips - GreenWorks STE304 Manual Del Operador

9.5 ADJUST THE CUTTING
DIAMETER
The machine is set at a 13 in. (330 cm) cutting diameter.
You can adjust to a 15 in. (381 cm) cutting diameter.
Set the cutting diameter to 13 in. (330 cm) for greater
runtime and 15 in. (381 cm)for a larger cutting area.
1. Remove the battery pack.
2. Remove the blade screws from the cut-off blade.
3. Move the cut-off blade (17) forward or rearward.
4. Tighten the blade screws.
9.6

LINE CUT-OFF BLADE

This trimmer is equipped with a line cut-off blade (17) on the
guard. The line cut off blade continuously trims the line to
ensure a consistent and efficient cut diameter. Advance line
whenever you hear the motor running faster than normal, or
when trimming efficiency diminishes. This will maintain best
performance and keep line long enough to advance properly.
9.7

OPERATION TIPS

WARNING
Keep clearance between the body and the machine.
WARNING
Do not operate the machine without guard in place.
Do these tips when you use the machine
NOTE
English
• Keep a firm hold with the two hands on the machine
while the string head is spinning.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
• Remove the battery pack.
• Remove the grass.
9.8

CUTTING TIPS

• Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
• Move the machine from right to left to prevent thrown
debris toward the operator.
• Do not cut in the dangerous area.
• Do not force the trimmer head into uncut grass.
• Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
Dangerous
cutting area
9
EN
Direction
of rotation
Best cutting area