Technical Specifications; Description Of The Display Unit; Cooling Unit; Identification - ifi 750 Manual Del Usuario

1 TECHNICAL SPECIFICATIONS

1.1 DESCRIPTION OF THE DISPLAY UNIT

Fig.1
The bar Panorama modules may be integrated and
ducted with other modules.
I t s l i n e O R I G I N AT E S T H E M a n d S I M P L E
SUPERFICIAL ESPOSITIVE favor one MUCH VERY
VISIBLE WIDTH and.
The Its structure is created in order to allow to a better
plan therefore to take advantage of all the space
available.
under control the temperatures of hte cooled part of
the Panorama bar
Tubs are made available with reserve container (two
"carapine" high) or without reserve container (one
"carapina" high) with ventilated cooling system.
There are also tubs provided with glycol cooling
system.
All versions are compatible with Rotostop "carapina"
(Pic. 3 pos. A).

1.1.2 COOLING UNIT

The refrigeration unit consists of an airtight compressor
cooling fans. Models with water condensers or mixed
air-water condensers are also available.

1.2 IDENTIFICATION

In any communication with the manufacturer or
with technical assistance centres, always quote the
SERIAL NUMBER of the display unit (this can be
found on the data plate (Fig. 4a, pos.B).

1.3 APPLIED REGULATIONS

The display unit complies with the following
regulations:
Fig.4a
- 2006/95/EC (Low Voltage equipment Directive)
- 97/23/EC (Pressure equipment)
- 2004/108/EC (Electromagnetic compatibility)
B
26