Intended Use And Restrictions; Manufacturer'S Identification Label Description; Installation And Assembly; Connections - CombiSteel DROP-IN Serie Manual De Instrucciones

EN
accepted, unless the relevant claim is placed within a maximum period of 24 hours after
receiving the goods.
When the device has been accepted, it is preferable to keep it unpacked until it is put into service
to protect it from any possible mechanical knocks, dust, dirt, etc....
The packaging consists of a cardboard box.
For correct and safe lifting and handling operations:
• Arrange a suitable area with flat floor for machine unloading and handling operations.
• Use the type of equipment most suitable for characteristics and capacity
• Make sure the load is stable;
• Handle the machine, keeping it at minimum height from the ground.

3.3 INTENDED USE AND RESTRICTIONS.

Check that the voltage and frequency of the electricity supply network coincide with those
described in the characteristics plate.
It is essential that the electrical installation must be properly earthed, and must have the
necessary protection of a thermal magnetic switch and a differential breaker. Do not connect
other appliances in the same electric socket.
The manufacturer declines any liability for improper use of the product.

3.4 MANUFACTURER'S IDENTIFICATION LABEL DESCRIPTION

3.5 INSTALLATION AND ASSEMBLY

Avoid having direct sources of heat, cold, humidity, sunlight and ultraviolet rays in the final
location of this appliance. Heaters, radiators, air conditioning, etc. can have a negative influence
on the correct operation of the same.

3.6 CONNECTIONS

Once the plate or tray has been fitted into the hole in the furniture destined for this purpose,
the anchoring is carried out by means of the anchoring supplied as shown in Figure 4.
The DE-CH120 and DE450must be connected to the mains whereas DE-CH80 MODEL is a neutral
furniture.
The DE-CH120 and DE450 models have an ON/ OFF switch and a remote regulator to change the
colour shades.
Instruction Manual
Data in the identification label:
1. Brand
2. Serial number (code+ year+ serial
number)
3. Code:
4. Model:
5. CE symbol
6. Waste disposal symbol
7. Manufacturing site
8. Gas Type
9. Gas quantity (gr)
10. Climatic class
11. Working range temperature:
12. Voltage:
13. Power consumption
[12]