Machine Disposal; Troubleshooting Chart - CombiSteel DROP-IN Serie Manual De Instrucciones

EN

5.3 MACHINE DISPOSAL

The product is made up of metal parts and stone parts. The packaging is made of plastic and
cardboard. For any part of the appliance, please note that:
• At the end of the product's life-cycle, make sure it is not dispersed in the environment.
• Each part must be collected and disposed of separately, according to their distinctive
characteristics (e.g. metals, plastic, rubber, etc.)
• The public or private waste collection systems defined by local legislation must be
considered.
• The equipment may contain hazardous substances: the improper use or incorrect
disposal may have negative effects on human health and on the environment;
• In the event of illegal disposal of electrical and electronic waste, penalties are specified
by local waste disposal legislation.

6 TROUBLESHOOTING CHART

6.1 TROUBLESHOOTING CHART
Some problems are due to causes that are easily resolved without having to contact the
technical service.
Please read the following table carefully:
Problem
The appliance does not work
It does not light
All the basic checks have been carried out and
the problem remains
Procedure
Check that the appliance is correctly
connected to the electricity socket and
control panel, and that the automatic power
limiter has not tripped.
Make sure that the LED and the connector are
not broken, check the anchoring system of
the appliance elements that may have moved
or become loose. If it is necessary changing
any component, call
Assistance Service.
Contact your distributor or your Technical
Assistance Service.
Instruction Manual
your Technical
[14]