Wayne Dalton Prodrive 3220C Instrucciones De Instalación Y Manual Del Propietario página 14

Deluxe Multi-Function Wireless
Wall Station Installation Continued
(If Included)
Remove the battery cover (right-hand side of
wall station) by disengaging the battery cover's
lower clip. Install two AAA batteries into the wall
station observing the polarity, (+) and (-), of
both batteries. After about three seconds, the
red LED will begin to blink every three seconds.
Up/Down
Re-install the battery cover by first inserting its
P r
LED
e s
top into the wall station then inserting and
s
H e
r e
securing its bottom.
NOTE: To slow blink rate or turn off, refer to
wall station operation page 28 "Back Lit LED
Light".
Battery
Wall
Cover
Station
(2) AAA
Lower
Batteries
Clip
10
Entrapment
Warning Label
Tools Needed: Apply entrapment warning label in a
convenient location next to the wall station.
Use mechanical fasteners if adhesive will
None
Wall Station
not adhere.
Service
Entrance
Door
Entrapment
Warning Label
8
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com