Dash Disassembly - Metra 99-9228B Instrucciones De Instalación

CAUTION: Do not remove any
connectors with the key in the on
position, and do not cycle the key
with any modules disconnected.
1. Move the shifter to the rearmost
position, unsnap the shifter trim
and move it to one side. (Figure A)
2. Remove (2) T-25 Torx screws from
the bottom of the radio/climate
control panel, and then remove the
entire assembly. (Figure B)
3. With the radio/climate control panel
removed from the vehicle, remove
(4) T-25 Torx screws securing the
radio to the sub-dash housing, then
release the clips and remove the
radio. (Figure C)
4. Cut the back of the sub-dash
housing to make room for the
aftermarket radio assembly.
Continue to kit assembly

Dash Disassembly

(Figure A)
99-9228B
(Figure B)
2
(Figure C)