Hinkley 52 VENTUS Manual De Instrucciones página 11

Motor to Receiver Electrical Connections: (Fig. 3)
5
Connect the black wire from the fan to the black wire
marked "TO MOTOR L" on the receiver. Connect the
white wire from the fan to the white wire marked "TO
MOTOR N" on the receiver. Connect the blue wire from
the fan to the blue wire marked "FOR LIGHT" on the
receiver. Secure all the wire connections with the
plastic wire nuts provided.
Receiver to House Supply Wires Electrical Connections:
6
(Fig. 3) Connect the black (hot) wire from the ceiling to
the black wire marked "AC in L" from the receiver.
Connect the white(neutral) wire from the ceiling to the
white wire marked "AC in N" from the Receiver. Secure
the wire connections with the plastic wire nuts provid-
ed.
If your outlet box has a ground wire (green or bare
7
copper) connect it to the fan ground wires; otherwise
connect the hanging bracket ground wire to the
mounting bracket. Secure the wire connection with a
plastic nut provided. After connecting the wires, spread
them apart so that the green and white wires are on
one side of the outlet box and black and blue wires are
on the other side. Carefully tuck the wire connections
up into the outlet box. (Fig. 3)
Note:
Fan must be installed at a maximum distance of 30 feet from
the remote transmitter for optimal signal transmission between
the transmitter and the fan's receiving unit.
Outlet box
Black (hot)
Black ("AC IN L")
Receiver
Black ("to motor L")
Blue (for light)
Blue (for light)
Black (motor)
Fig. 3
©2019 Hinkley Lighting, Inc. | hinkley.com
White (neutral)
Green or bare
copper (ground)
White ("AC IN N")
White ("to motor N")
(Connect to
Ground
ground wire on
(green)
hanger bracket
if no house
ground wire
exists.)
White (neutral)
09