Rain Bird ESP-LX Modular Instrucciones De Montaje página 5

8.35
1.57
2. Drill five pilot holes sized for each mounting
hole marked on the template. The four pilot
holes in the middle of the template should be
sized for #10 x 1.25" (3.18 cm) screws while the
pilot hole at the lower right should be sized
for a #8 x 1.25" (3.18 cm) screw. Remove the
mounting template and if necessary install wall
anchors.
3. Ensuring proper alignment of the bottom
notch with the wall stud, mount the hanger
bracket (included) with four #10 self-tapping
screws (included) to the four primary pilot
holes (see Figure 2).
ESP-LX Modular Pedestal and Controller Cabinet - Mounting Instructions
14.81
Level Line
Pilot Hole Pilot Hole
3.75 4.06
9.41
Figure 1
(4x) Stainless stell truss head
self-tapping screws
Figure 2
Controller Cabinet Mounting Instructions (LXMM)
Pilot Hole Pilot Hole
3.75
Pilot Hole
(4x) #10 Wall anchors (optional)
12.62
Stud Line
#8 Wall anchor
(optional)
5