Parts description
Control panel
Operation
1. Please unpack the unit.
2. Plug the unit into a 220-240V~, 50-60Hz outlet.
3. You can use the following functions on the control panel, as described below:
ON/OFF: To start the appliance, please press ON/OFF button.
SPEED: The appliance has three fans. Please press "FAN1", "FAN2" and/or "FAN3" and choose for every fan
the desired speed level (low/mid/high). By pressing every time "FAN1", "FAN2" and/or "FAN3", the speed will
increase to one level.
TIMER: Please press this button to set the timer (1-7h). Choose, in how many hours you want the appliance to
turn off. Press one time and add one hour.
MODE: Please press this button to choose between normal, nature or sleep mode. The indicator will light on.
Normal mode: All three fans can be controlled independently.
Nature mode: The speed of all 3 fans will change automatically in small intervals. The natural wind will be
imitated.
Sleep mode: The speed of all 3 fans will change automatically in small intervals. The device works mostly
in lower speed levels, where the noise level is reduced.
OSC: Please press this button one time. The product will oscillate left and right automatically. If you press the
button again, the oscillation will stop. Meanwhile you can adjust the 3 fans up and down manually.
Remote Receiver
Front cover
Fan blade
Body
Base
Control panel
Back cover