Parker EOMAT ECO Manual De Funcionamiento página 19

EOMAT ECO
6. CE Conformity Declaration
according to machine Directives 98/37/EG
according to EMV-Directives 89/336/EWG/9; 93/7/EWG
according to low voltage Directives 73/23/EWG; 98/37 EWG
Manufacturer:
We hereby declare that the EOMAT ECO described in the following is not dangerous if:
- the prescribed usage is adhered to,
- the requirements are in accordance with the Directives described above.
Product description:
Type description:
Operating Manual No.
The following harmonised standards have been applied:
DIN EN ISO 12100-1
DIN EN ISO 12100-2
National standards and technical specifications applied:
DIN 349
DIN 414
DIN EN 811
DIN EN 953
DIN EN 982
DIN EN 1037
DIN EN 60204 Teil 1-VDE 0113-1
DIN EN 61000-4-1
BGV A1.2.3
th
Bielefeld, 27 of October 2006
Parker Hannifin GmbH & Co. KG
Am Metallwerk 9
33659 Bielefeld, Germany
Electro-hydraulic machine for assembling
EO PSR/DPRProgressive rings and EO-2 fittings
EOMAT ECO
EOMATECO/MANUAL - 10/2006
Restriction equipment (coverings)
Electrical controls
Minimum distances to avoid crushing parts of the body
Machine safety – rules for the drafting and
formation of safety standards
Safe distances to avoid danger points to lower limbs
General requirements for the formation and design of
separating protective equipment (fixed, movable)
Technical safety requirements for technical fluid
plant and its components (hydraulics)
Avoidance of unexpected start-up
Machine electrical equipment
Electromagneticcompatibility
Accident prevention regulations
Page 18 EOMATECO/MANUAL