Packing, Transportation And Storage; Erection Of The Machine - Parker EOMAT ECO Manual De Funcionamiento

EOMAT ECO

7. Packing, transportation and storage

7.1 Packing
The machine will be delivered on a particle board half-pallet, covered with card-
board packaging and secured with straps.
7.2 Transportation
Transportation in original packing according to 7.1:
the machine can be transported with the help of a fork-lift truck.
Transportation without original packing:
The EOMAT ECO can be carried by the carrying handle at the side just like a suit-
case or pulled by the front telescopic handle. This must be fully withdrawn.
Telescopic handle security during transportation:
Remove the spring cotter under the machine. It is marked by a red
tape.
7.3 Storage
Storage may be undertaken only in a closed, dry space and protected against me-
chanical damage.
Maximum relative air humidity 80%, not condensing.
Ambient temperature: +5° to + 45° C
If stored for more than 14 days, the machine must be specially protected and
packed.

8 Erection of the machine

The machine needs a set-up location of about 760x800 mm.
The securing measures during transportation may be removed only when the machine
has been placed on its appropriate location.
The machine should be examined for transportation damage before the erection
work commences. The place where the machine will be set up must be suitable
for the weight of the machine and its tooling.
All the machine connections (cables) are to be made so that people will not trip
up on them.
The machine may be operated only in an enclosed dry area. The surface must
be even and level.
Page 19 EOMATECO/MANUAL