Emptying The Dirt Tank - Bissell POWERFORCE HELIX TURBO REWIND PET 2692 Serie Guia Del Usuario

Emptying the Dirt Tank

1
Cleaning the Pre-Motor Filter
1
Cleaning the Post-Motor Filter
1
With Dirt Tank removed, press
filter cover release button to
access post-motor filter.
WARNING
disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting
checks.
WARNING
place or with the Dirt Tank missing. Allow components to dry before reassembling the Dirt Tank.
8
www.BISSELL.com
Press the Tank Release
Button and pull handle
to lift Dirt Tank away
from vacuum.
2
Press
the Tank
Release
Button
and pull
handle to
lift Dirt Tank
away from
vacuum.
To reduce the risk of electrical shock, turn Power Switch OFF and
Do not operate the vacuum with damp or wet filters, without filters in
2
Open the
Dirt Tank
lid by lifting
the release
latch on
the front.
2
Holding Dirt Tank
over a trash bin,
press Dirt Tank
Empty Button
on back to open
tank bottom and
dump the debris.
Snap bottom
back into place
when empty.
3
Remove the pre-
motor filter by
pulling it from the
tank lid. Clean
it with warm
water. Allow to
completely dry
before returning it
back into the Dirt
Tank lid.
Clean all filters with
mild detergent, rinse
and squeeze all excess
water. Allow filters to
dry completely before
reinserting.