Important Notice - Avery Dennison Monarch Manual Del Usuario

IMPORTANT NOTICE:

This device is an 802.11a/b/g/n wireless printer/RF device intended for office and
warehouse use in all EU and EFTA member states. For more information, refer to the
printer's Declaration of Conformity or Regulatory Addendum.
RFID Regulatory Compliance Information (if installed)
WARNING: The Federal Communications Commission warns that changes or modifications of
the radio module within this device not expressly approved by Impinj, Inc. could
void the user's authority to operate the equipment.
To comply with FCC's RF radiation exposure requirements, the antenna(s) used for this
transmitter must be installed such that a minimum separation distance of 20 cm is maintained
between the radiator (antenna) & user's/nearby people's body at all times and must not be co-
located or operating in conjunction with any other antenna or transmitter.
Impinj, Inc. Mini-Guardrail Model IMP-A0303-00, segmented loop (Near Field) antenna, -20 dBi
far field gain.
IMPORTANT NOTICE:
This RFID Printer is authorized for use in all EU and EFTA member states. For more
information, refer to the printer's Declaration of Conformity or Regulatory Addendum.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of
a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
This radio transmitter IC: 1502A-RS500GX has been approved by Industry Canada to operate
with the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use with
this device.
2