WARNING! Always disconnect the appliance from the socket
EN
before cleaning or performing maintenance.
• Clean the accessories according to the instructions in the "Cleaning before first use" chapter.
• Wipe the motor unit with a dampened and thoroughly squeezed out sponge.
• Dry with a dry cloth.
Should one of the problems indicated occur, adopt the proposed solution:
Problems
The food is not chopped evenly
The parsley has not been chopped
properly
The meat is not chopped properly
The container rises while
processing
14
CLEANING AND MAINTENANCE
TROUBLESHOOTING
Use the pulse mode and not continuous mode.
Wait for the blades to stop completely. Remove the main cover
and the splash-proof cover, and mix the ingredients again with
a spatula.
Close once again and continue processing in pulse mode.
The container has been filled with too many ingredients;
remove the excess ingredients and continue processing.
Repeat the operation using dry parsley.
Chop the meat in 1 cm pieces and remove any cartilage. Do
not exceed the maximum quantity of 400 g.
Pieces of food may have set between the container and the
blades. In this case, unplug the appliance, remove the cover
and reposition the container in its seat. Close the container
with the cover and resume processing.
Solutions