Festo SLTE Instrucciones De Utilizacion página 31

SLTE
Reference travel against a reference switch:
Make sure that both rubber buffers are
S
situated as end position cushioning in the
fixed stops 6 (status as at delivery).
If necessary, press one of the rubber
buffers supplied into the empty holes of
each of the fixed stops.
With all applications:
Make sure that the device is fitted free of
S
mechanical stress and distortion.
Make sure that drive module 4 has
S
sufficient space for heat dissipation.
Narrow installation situations can cause
an accumulation of heat.
Avoid damaging the slide guide.
S
Damage to the slide guide will impair the functioning of the roller bearings.
Festo SLTE 0910a English
Fig. 4
Fig. 5
31