User Notes - Festo CPV-DI01 Serie Breve Descripción

CPV-DI01
1

User Notes

The CPV valve terminal with fieldbus direct link is intended ex-
clusively for use as a station on one of the following protocols:
–
PROFIBUS-DP (to EN 50170)
–
Festo Fieldbus
–
ABB CS31
–
Klöckner-Moeller SUCOnet K
The limit values provided in the technical data must be ob-
served.
For detailed information, see the description "CP Valve Terminal
with direct link Type CPV..-DI01".
WARNING:
• Turn the power off before plugging or unplugging
connectors (function damage).
• Use only power supplies which provide reliable electrical
isolation of the supply voltage per IEC 742/EN 60742/
VDE 0551 and guarantee at least 4 kV of isolation
protection (Protected Extra-Low Voltage, PELV, see
adjacent symbol). Switching power supplies are acceptable
if they guarantee safe isolation per EN 60950/VDE 0805.
• Connect an earth conductor with sufficient cross section
to the connection marked with
9904NH
.
11